1/350 PL Enterprise Refit/A - v2
5 Color Master Aztec & Paint Mask Set:
Compatible with the Polar Lights 1/350 Refit/A.
This is the most complete, detailed, & accurate Aztec & paint mask set available. Not just an Aztec set, but an entire masking solution. Based entirely on production photos & screen shots from the movies. These masks were created to accurately replicate the Aztec & Interference patterns that were on the original filming model for both the "Refit" & "A" paint jobs. They are comprehensive & complete, giving the builder many options & the ability to create a detailed full 5 color Aztec & Hull Plating pattern. All of the masks are custom fitted & contoured to match every single panel on the model. You will not get a mask set that fits ok, you will get a mask set designed for this model specifically. No detail went unchecked, for an example, the patterns in the above photos were created with this set.
This is a very complex design & mask set,
it requires advanced to professional level modeling skills.
You must use an airbrush & have experience with it.
Instructions must be downloaded here:
1_350_RefitA_v2_Instructions.pdf 15MB
Check out our instructional videos at:
http://www.youtube.com/user/OrbitalDrydock3/videos
UPDATES FOR v2
-Saucer-
- Added Impulse Crystal Ring mask
- Updated Rings around both the B/C deck & Planetary Sensor masks
- Updated Planetary Sensor masks
-Secondary Hull (E-Hull)-
- Added true "Refit" hull side masks
- Added shuttle bay "Yellow Landing Stripe" mask
- Added reusable "3 Small Bars" & random Mini Squares masks
- Updated Belly & Belly "Ribs" masks
- Updated Tail "Ribs" masks above shuttle bay
- Updated Neck & Torpedo Launcher masks
- Updated Pylons with true "Lightning Bolt" pattern
What you get with your set are:
- 14 8x11 pre-cut vinyl sheets
- 2 7x11 pre-cut vinyl sheets
- 1 6x11 pre-cut yellow kabuki tape pinstripe & window mask sheet
- 12 8x11 sheets of clear transfer tape
- 1 vinyl application tool
- -BONUS MASK 1 Bow registration number mask. Not available anywhere else!
- Instructions are a pdf download
Sections Included:
- 1 Upper Saucer 5 color mask set, including masks for the escape pod, impulse engine hatches, phasers, & reusable random panel templates
- 1 Lower Saucer 5 color mask set, including masks for the loading hatches, sensor dome, & phasers, & reusable random panel templates
- 1 Neck & Torpedo Launcher 5 color set
- 2 Engineering Hull 5 color sets - Refit & "A"
- 2 complete Strongback sets for doing multiple color overlays.
- 2 complete Deflector & Thruster section sets for doing multiple color overlays.
- 2 complete 5 color Nacelle & 3 color Pylon sets, 1 set Port & 1 set Starboard.
- 1 shuttle bay Yellow Landing Stripe mask
- 1 set of 0.75mm pinstripe for masking the warp grill recesses.
- 1 set of thick pinstripe for the sensor bands on the saucer rim
- 1 set of medium pinstripe for masking contours around the bridge
- Full window sets for the saucer, E-hull, & neck. Including masks for the paragraphix photoetch arboretum & vip lounge windows, impulse crystal, kit provided & DLM impulse engines, external red shuttle bay lights, & external shuttle bay detail areas around the doors.